SPEC 8525 September, 2016 HVTECK TRXLPE/Tape Shield/PVC/AIA/PVC, Power, Shielded, Armored 28 kV (133% Ins. Level) / 35 kV (100% Ins. Level), 345 Mils, CSA HVTECK, Three Conductor Features: • Rated at 90˚C wet or dry • Excellent crush, oil and chemical resistance • Provides long service life • Cost-effective alternative to installations in conduit • Meets cold bend and impact tests at -40˚C Product Construction: Conductor: • 1/0 AWG thru 350 kcmil bare copper compact Class B strand Strand Shield: • A thermoset semi-conducting strand shield is extruded over the conductor Insulation: • Tree-Retardant Cross-linked Polyethylene (TRXLPE) Insulation Shield: • This consists of a semi-conducting thermosetting layer, applied in a triple extrusion process, plus a helically applied gapped copper tape • Color-coded: black, red or blue colored tape placed longitudinally under the copper tape shield Ground (Bonding) Conductor: • The conductor consists of one uninsulated stranded bare copper conductor Inner Jacket: • Lead-free, flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black Armor: • Aluminum Interlocked Armor (AIA) Overall Jacket: • Lead-free, ACID-FLAME-CHECK ✓✓® flame- retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black or as requested Options: • Galvanized Steel Interlocked Armor (GSIA) Applications: • For wiring in all hazardous locations when used with certified HL cable glands • For exposed and concealed wiring in dry, damp or wet locations • For use in ventilated, non-ventilated and ladder- type cable trays in dry, damp or wet locations • For direct earth burial (with protection as required by inspection authority) Compliances: Industry Compliances: • CSA Standard C68.10 Flame Test Compliances: • CSA FT1 and FT4 • IEEE 383 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEEE 1202 (70,000 BTU/hr) CSA FT4 • ICEA T-30-520 (70,000 BTU/hr) • ICEA T-29-520 (210,000 BTU/hr) Other Compliances: • Hazardous Location Rating: HL • EPA 40 CFR, Part 261 for leachable lead content per TCLP method • OSHA Acceptable • RoHS Compliant Packaging: • For Canadian customers, lengths are provided on returnable wood or steel reels that require a deposit. Extra charges apply for lagging, pulling eyes, paralleling and plexing • For U.S. customers, material cut to length and shipped on non-returnable wood reels, while lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit. Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and plexing NOMINAL DIAMETER (OVER) CATALOG NUMBER COND. NO. OF (AWG/ kcmil) COND. SIZE GROUND WIRE SIZE INSULATION INSULATION SHIELD INNER JACKET ARMOR CABLE (AWG) INCHES mm INCHES mm INCHES mm INCHES mm INCHES mm 1000 FT LBS/ kg/ km COPPER WEIGHT NET WEIGHT W/ARMOR LBS/1000 FT kg/km AL STEEL AL STEEL AMPACITY** (40˚C AMBIENT) 1/0 AWG THRU 350 kcmil—THREE CONDUCTOR— 28 kV (133% INS. LEVEL) / 35 kV (100% INS. LEVEL), 345 MILS INS. (8.76 mm) 17496.895100* 3 1/0 6 1.08 27.5 1.17 29.7 2.76 70.2 3.05 77.5 3.18 80.8 1200 1786 4360 5620 6490 8370 187 17496.895200* 3 2/0 6 1.12 28.5 1.21 30.8 2.92 74.2 3.21 81.6 3.36 85.4 1466 2182 4950 6280 7370 9350 215 17496.895300* 3 3/0 4 1.17 29.7 1.26 32.0 3.02 76.7 3.31 84.1 3.46 87.9 1848 2750 5490 6860 8160 10210 245 17496.895400* 3 4/0 4 1.22 31.0 1.31 33.3 3.14 79.6 3.43 87.2 3.58 90.9 2264 3369 6090 7510 9060 11180 281 17496.896000* 3 250 4 1.27 32.3 1.37 34.8 3.26 82.9 3.55 90.2 3.70 94.0 2635 3921 6660 8140 9910 12120 310 17496.896200* 3 350 3 1.42 36.1 1.51 38.4 3.56 90.5 3.85 97.8 4.00 101.6 3621 5389 7960 9540 11840 14190 377 Dimensions and weights are nominal; subject to industry tolerances. *Non-stock item; minimum runs apply. Please consult Customer Service for price and delivery. ** Ampacities at other voltage levels do not vary significantly. Special approval by local electrical inspection authorities may be required (Ref. CE Code Part 1, Appendix B, Rule 4-004). OUTDOOR Phone: 888-593-3355 www.generalcable.com
