SPEC 8550 September, 2016 VERTITECK TECK90 ® XLPE/PVC/GSIA/PVC, Power, Unshielded, Armored 1 kV, CSA TECK90, Three Conductor Product Construction: Conductor: • 1/0 AWG thru 1000 kcmil bare copper compact Class B strand Insulation: • Cross-linked Polyethylene (XLPE), Type RW90 • Color-coded: printed numbers Ground (Bonding) Conductor: • The conductor consists of one uninsulated stranded bare copper conductor Inner Jacket: • Lead-free, flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black Armor: • Galvanized Steel Interlocked Armor (GSIA) Overall Jacket: • Lead-free, ACID-FLAME-CHECK ✓✓® AG14 flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black Options: • Galvanized Steel Interlocked Armor (GSIA) Applications: • For exposed and concealed wiring in dry, damp or wet locations • For use in ventilated, non-ventilated and ladder- type cable trays in dry, damp, or wet locations • For direct earth burial (with protection as required by inspection authority) • For wiring in all hazardous locations when used with certified HL cable glands Applications (cont’d.): • Cost-effective alternative to installation in conduit • Typical vertical installations include mine shafts, tall commercial buildings, inclined tunnels and vertical cable trays (Note that the overall jacket is required for all damp and wet locations and for all corrosive environments: CE Code Part 1, Rules 12-708 and 22-200) Features: • Rated at 90˚C wet or dry • The jacket under the armor (inner jacket) is designed with longitudinal raised ribs. The armor is then applied and bites into these ribs to provide a solidly locked construction. This feature enables the cable to be self-supporting (core will not slip) during vertical installation when cable weight is supported by the copper conductors • Lighter than mine shaft cable with conventional steel wire armor (SWA) • More flexible than SWA cables, resulting in easier handling during installation • Terminations and connections to electrical cabinets are similar to standard TECK90 cables • Meets cold bend and impact tests at -40˚C Compliances: Industry Compliances: • CSA Standard C22.2 No. 131 and No. 174 Flame Test Compliances: • CSA FT1 and FT4 • IEEE 383 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEEE 1202 (70,000 BTU/hr) CSA FT4 • ICEA T-30-520 (70,000 BTU/hr) Other Compliances: • Hazardous Location Rating: HL • EPA 40 CFR, Part 261 for leachable lead content per TCLP method • OSHA Acceptable • RoHS Compliant Packaging: • For Canadian customers, lengths are provided on returnable wood or steel reels that require a deposit. Extra charges apply for lagging, pulling eyes, paralleling and plexing • For U.S. customers, material cut to length and shipped on non-returnable wood reels, while lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit. Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and plexing CATALOG NUMBER 11289.415100* 11289.415200* 11289.415300* 11289.415400* 11289.416000* 11289.416200* 11289.416500* 11289.417000* 11289.417500* NO. OF COND. (AWG/ kcmil) COND. SIZE GROUND WIRE SIZE (AWG) MIN. AVG. INSULATION THICKNESS NOMINAL DIAMETER (OVER) INSULATION ARMOR CABLE INCHES mm INCHES mm INCHES mm INCHES mm 1000 FT kg/km COPPER WEIGHT LBS/ NET WEIGHT W/STEEL ARMOR 1000 FT kg/km 1/0 AWG THRU 1000 kcmil—THREE CONDUCTOR—1000 V 3 1/0 6 0.080 2.03 0.36 9.0 1.66 42.2 1.78 45.2 1082 1610 2520 3760 170 3 2/0 6 0.080 2.03 0.54 13.8 1.75 44.5 1.87 47.5 1342 1997 2880 4280 195 3 3/0 4 0.080 2.03 0.59 15.0 1.85 47.0 1.97 50.1 1719 2558 3360 5000 225 3 4/0 4 0.080 2.03 0.64 16.3 1.96 49.8 2.08 52.9 2133 3174 4080 6080 260 3 250 4 0.090 2.29 0.71 18.0 2.15 54.6 2.27 57.7 2498 3718 4790 7130 290 3 350 3 0.090 2.29 0.81 20.4 2.36 60.0 2.50 63.5 2475 5171 6100 9080 350 3 500 2 0.090 2.29 0.93 23.5 2.62 66.6 2.76 70.1 4891 7279 7900 11760 430 3 750 2 0.090 2.29 1.10 27.9 2.99 76.0 3.13 79.5 7306 10873 10830 16110 535 3 1000 1 0.090 2.29 1.25 31.8 3.38 85.6 3.54 89.9 9714 14456 13970 20780 615 Dimensions and weight are nominal; subject to industry tolerances. *Non-stock item; minimum runs apply. Please consult Customer Service for price and delivery. **Ampacity is based on CE Code Part 1, Table 2 (three conductors in raceway [conduit]) and Rule 4-004. *** Maximum self-supporting lengths are based on safety factor of 5 and a tensile strength of 37,000 psi for soft drawn copper. Higher safety factors or lower tensile strength values may be required to address more stringent safety regulations. 212 232 254 260 270 288 *** *** *** LBS/ AMPACITY** (30°C AMBIENT) SUPPORTING LENGTH***(m) MAXIMUM SELF- Phone: 888-593-3355 www.generalcable.com