SPEC 9805 October, 2014 CCW Armored Power, 5 kV 133%/8 kV 100%, Shielded, 3/C VFD UL Type MC-HL or MV-105, CSA Type HL, EPR, 105°C, Cable Tray Use Sunlight-Resistant, Direct Burial, UL Marine Shipboard Cable, ABS CWCMC, Arctic-Grade ® Product Construction: Conductor: • Bare annealed copper per ASTM B3 • Compact stranding per ASTM B496 Extruded Strand Shield (ESS): • Extruded thermoset semi-conductor stress control layer over the conductor per ICEA S-93-639 and UL 1072 Insulation: • 115 mils Ethylene Propylene Rubber (EPR) insulation per ICEA S-93-639 and UL 1072 Extruded Insulation Shield (EIS): • Thermoset semi-conducting polymeric layer, free stripping from the insulation per ICEA S-93-639 and UL 1072 Shield: • 5 mil annealed bare copper tape with 25% overlap Phase Identification: • Color-coded polymeric identification tape laid under the shield – black, red and blue Grounding Conductors: • Three (2) split Class B stranded bare annealed copper grounding conductors • Sized in accordance with UL 1072 and NEC Article 250 Cable Assembly: • Insulated and grounding conductors are cabled together with non-hydroscopic fillers when required • Binder tape is applied over the cabled core CCW Armor: • Impervious, continuously welded and corrugated aluminum alloy sheath per UL Standards 1569 and 2225 • CCW armor conductivity meets the grounding requirements of NEC Article 250 Jacket: • Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black • Low temperature performance meets ASTM D746 brittleness temperature at or below -60°C Applications: • Variable Frequency Drives: 3-conductor CCW armored cables with three (3) symmetrical grounding wires are the preferred wiring method for use with AC motors controlled by pulse-width modulated inverters in VFD applications • CCW armored medium-voltage power cables offer an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods • For use on feeders and branch circuits for power distribution systems per NEC Articles 328 and 330 • For use in Class I, II and III, Divisions 1 and 2; and Class I, Zones 1 and 2 hazardous locations per NEC Articles 501, 502, 503 and 505 • Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart • Installed in both exposed and concealed work, wet or dry locations, directly buried or embedded in concrete • Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American Petroleum Institute Features: • CCW armor provides an impervious barrier to moisture, gas and liquids and meets grounding requirements of UL 1072 and the NEC Features: (cont’d.) • Triple Extrusion: The strand shield, EPR insulation and insulation shield are all extruded in one operation • General Cable’s EPR insulation system has outstanding corona resistance and high dielectric strength, and it provides electrical stability under stress • Meets cold bend at -55°C • 105°C continuous operating temperature, wet or dry • 140°C emergency rating • 250°C short circuit rating Specifications: Design Adherence: • ICEA S-93-639/WC74, 5-46 kV Shielded Power Cables • AEIC CS8 Specification for Shielded Power Cable, 5 – 46 kV • UL 1072 Medium-Voltage Power Cables • UL 1569 Metal Clad Cables • UL 2225 Cables and Cable Fittings for Use in Hazardous Locations • UL 1309 Marine Shipboard Cable • CSA C68.10 Flame Tests: • ICEA T-29-520 (210,000 BTU/hr) • IEEE 383 (70,000 BTU/hr) • CSA FT4 • IEEE 1202 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEC 60332-3 Cat. A Compliances: • UL Type MV-105 or UL Type MC-HL, SUN RES, CT USE, DIR BUR, -40°C, FT4, UL File # E90501 • UL Listed Marine Shipboard, UL File # E85994 • CSA Type HL, SR, FT4, -40˚C, CSA File # 27161 • American Bureau of Shipping (ABS) Listed for CWCMC Phone: 888-593-3355 www.generalcable.com
