103 Industrial Cables Product Construction: Conductor: • 2 AWG thru 750 kcmil bare copper compact Class B strand Strand Shield: • A thermoset semi-conducting strand shield is extruded over the conductor Insulation: • Tree-Retardant Cross-linked Polyethylene (TRXLPE) Insulation Shield: • This consists of a semi-conducting thermosetting layer, applied in a triple extrusion process, plus a helically applied gapped copper tape • Color code: black, red, or blue colored tape placed longitudinally under the copper tape shield Ground (Bonding) Conductor: • The conductor consists of one uninsulated stranded bare copper conductor Inner Jacket: • Lead-free, flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black Armor: • Galvanized Steel Interlocked Armor (GSIA) Overall Jacket: • Lead-free, ACID-FLAME-CHECK √√® AG14 flame-retardant, moisture- and sunlight- resistant Polyvinyl Chloride (PVC), red Options: • 105˚C TRXLPE Insulation Applications: • For exposed and concealed wiring in dry, damp or wet locations • For use in ventilated, non-ventilated and ladder- type cable trays in dry, damp or wet locations • For direct earth burial (with protection as required by inspection authority) • For wiring in all hazardous locations when used with certified HL cable glands • Cost-effective alternative to installation in conduit • Typical vertical installations include mine shafts, tall commercial buildings, inclined tunnels and vertical cable trays (Note that the overall jacket is required for all damp and wet locations and for all corrosive environments: CE Code Part 1, Rules 12-708 and 22-200) Features: • Rated at 90˚C wet or dry • The jacket under the armor (inner jacket) is designed with longitudinal raised ribs. The armor is then applied and bites into these ribs to provide a solidly locked construction. This feature enables the cable to be self-supporting (core will not slip) during vertical installation when cable weight is supported by the copper conductors Features (cont'd): • Lighter than mine shaft cable with conventional steel wire armor (SWA) • More flexible than SWA cables, resulting in easier handling during installation • Terminations and connections to electrical cabinets are similar to standard TECK90 cables • Meets cold bend and impact tests at -40˚C Compliances: Industry Compliances: CSA Standard C68.10 MV68.10 Flame Test Compliances: • CSA FT1 and FT4 • IEEE 1202 (70,000 BTU/hr) CSA FT4 Other Compliances: • Hazardous Location Rating: HL • EPA 40 CFR, Part 261 for leachable lead content per TCLP method • OSHA Acceptable • RoHS Compliant Packaging: • For Canadian customers, lengths are provided on returnable wood or steel reels that require a deposit. Extra charges apply for lagging, pulling eyes, paralleling and plexing • For U.S. customers, material cut to length and shipped on non-returnable wood reels, while lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit. Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and plexing SPEC 8600 Feb, 2025 NO. OF COND. COND. SIZE (AWG/kcmil) GROUND WIRE SIZE (AWG) NOMINAL DIAMETER (OVER) COPPER WEIGHT NET WEIGHT MAXIMUM SELF- SUPPORTING LENGTH** (M) INSULATION INSULATION SHIELD ARMOR CABLE INCHES mm INCHES mm INCHES mm INCHES mm LBS/ 1000 FT kg/km LBS/ 1000 FT kg/km 2 AWG THRU 750 kcmil—THREE CONDUCTOR—133% INS. LEVEL, 220 MILS INS. (5.59 mm)—15 kV 3 2 6 0.76 19.3 0.82 20.8 2.50 63.5 2.66 67.6 862 1283 4138 6157 85 3 1 6 0.79 20.1 0.85 21.6 2.57 65.3 2.73 69.3 1034 1539 4424 6583 100 3 1/0 6 0.83 21.1 0.89 22.6 2.65 67.3 2.81 71.4 1245 1853 4765 7090 118 3 2/0 6 0.87 22.1 0.93 23.6 2.74 69.6 2.90 73.7 1513 2251 5181 7709 137 3 3/0 4 0.91 23.0 0.97 24.5 2.81 71.3 2.94 74.7 1717 2554 4993 7430 155 3 4/0 4 0.96 24.3 1.02 25.8 2.92 74.1 3.05 77.5 2130 3169 5752 8558 176 3 250 4 1.02 25.8 1.08 27.3 3.05 77.4 3.20 81.2 2494 3711 6410 9538 188 3 350 3 1.12 28.4 1.18 30.0 3.36 85.3 3.54 89.9 3692 5494 8674 12907 215 3 500 3 1.23 31.2 1.30 33.0 3.62 91.9 3.80 96.5 5218 7764 10646 15841 250 3 750 2 1.42 36.0 1.49 37.9 3.89 98.8 4.05 102.9 7296 10857 13728 20427 277 Dimensions and weight are nominal; subject to industry tolerances. *Non-stock item; minimum runs apply. Please consult Customer Service for price and delivery. ** Maximum self-supporting lengths are based on safety factor of 5 and a tensile strength of 37,000 psi for soft drawn copper. Higher safety factors or lower tensile strength values may be required to address more stringent safety regulations. VERTITECK® HVTECK TRXLPE/Tape Shield/PVC/GSIA/PVC, Power, Shielded, Armored 15 kV CSA HVTECK, 133% Ins. Level, 220 Mils, Three Conductor
