SPEC 8625 September, 2016 VERTITECK HVTECK ® TRXLPE/Tape Shield/PVC/GSIA/PVC, Power, Shielded, Armored 15 kV, CSA HVTECK, 100% Ins. Level, 175 Mils, Three Conductor Features (cont’d.): This feature enables the cable to be self- supporting (core will not slip) during vertical installation when cable weight is supported by the copper conductors • Lighter than mine shaft cable with conventional steel wire armor (SWA) • More flexible than SWA cables, resulting in easier handling during installation Product Construction: Conductor: • 2 AWG thru 750 kcmil bare copper compact Class B strand Strand Shield: • A thermoset semi-conducting strand shield is extruded over the conductor Insulation: • Tree-Retardant Cross-linked Polyethylene (TRXLPE) Insulation Shield: • This consists of a semi-conducting thermosetting layer, applied in a triple extrusion process, plus a helically applied gapped copper tape • Color code: black, red, or blue colored tape placed longitudinally under the copper tape shield Ground (Bonding) Conductor: • The conductor consists of one uninsulated stranded bare copper conductor Inner Jacket: • Lead-free, flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black Armor: • Galvanized Steel Interlocked Armor (GSIA) Overall Jacket: • Lead-free, ACID-FLAME-CHECK ✓✓® AG14 flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), red Options: • Galvanized Steel Interlocked Armor (GSIA) Applications: • For exposed and concealed wiring in dry, damp or wet locations • For use in ventilated, non-ventilated and ladder- type cable trays in dry, damp or wet locations • For direct earth burial (with protection as required by inspection authority) • For wiring in all hazardous locations when used with certified HL cable glands • Cost-effective alternative to installation in conduit • Typical vertical installations include mine shafts, tall commercial buildings, inclined tunnels and vertical cable trays (Note that the overall jacket is required for all damp and wet locations and for all corrosive environments: CE Code Part 1, Rules 12-708 and 22-200) Features: • Rated at 90˚C wet or dry • The jacket under the armor (inner jacket) is designed with longitudinal raised ribs. The armor is then applied and bites into these ribs to provide a solidly locked construction. CATALOG NUMBER 17497.440200* 17497.440100* 17497.445100* 17497.445200* 17497.445300* 17497.445400* 17497.446000* 17497.446200* 17497.446500* 17497.447000* COND. NO. OF (AWG/ kcmil) 2 1 COND. SIZE GROUND WIRE SIZE (AWG) INSULATION INSULATION SHIELD NOMINAL DIAMETER (OVER) ARMOR • Terminations and connections to electrical cabinets are similar to standard TECK90 cables • Meets cold bend and impact tests at -40˚C Compliances: Industry Compliances: • CSA Standard C68.10 Flame Test Compliances: • CSA FT1 and FT4 • IEEE 383 (70,000 BTU/hr) • UL 1581 (70,000 BTU/hr) • IEEE 1202 (70,000 BTU/hr) CSA FT4 • ICEA T-30-520 (70,000 BTU/hr) • ICEA T-29-520 (210,000 BTU/hr) Other Compliances: • Hazardous Location Rating: HL • EPA 40 CFR, Part 261 for leachable lead content per TCLP method • OSHA Acceptable • RoHS Compliant Packaging: • For Canadian customers, lengths are provided on returnable wood or steel reels that require a deposit. Extra charges apply for lagging, pulling eyes, paralleling and plexing • For U.S. customers, material cut to length and shipped on non-returnable wood reels, while lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit. Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and plexing CABLE INCHES mm INCHES mm INCHES mm INCHES mm 1000 FT COPPER WEIGHT LBS/ NET WEIGHT kg/km 1000 FT kg/km 2 AWG THRU 750 kcmil—THREE CONDUCTOR—100% INS. LEVEL, 175 MILS INS. (4.45 mm)—15 kV 3 3 3 1/0 3 2/0 3 3/0 3 4/0 3 250 3 350 3 500 3 750 LBS/ SUPPORTING LENGTH** (M) 6 0.67 17.0 0.72 18.3 2.30 58.4 2.46 62.5 845 1257 3761 5596 6 0.70 17.8 0.76 19.3 2.37 60.2 2.53 64.3 1017 1513 4022 5985 110 6 0.74 18.8 0.80 20.3 2.46 62.5 2.61 66.3 1229 1829 4385 6525 128 6 0.78 19.8 0.84 21.3 2.55 64.8 2.71 68.8 1497 2228 4800 7142 147 4 0.83 21.1 0.89 22.6 2.67 67.8 2.83 71.9 1882 2800 5354 7967 166 4 0.88 22.4 0.94 23.9 2.79 70.9 2.95 74.9 2304 3428 5979 8897 188 4 0.92 23.4 0.98 24.9 2.89 73.4 3.05 77.5 2677 3983 6518 9699 204 3 1.02 25.9 1.09 27.7 3.15 80.0 3.33 84.6 3675 5468 8043 11968 231 3 1.14 29.0 1.21 30.7 3.47 88.1 3.66 93.0 5111 7605 10132 15076 262 2 1.32 33.5 1.39 35.3 3.86 98.0 4.04 102.6 7555 11242 13403 19944 298 Dimensions and weight are nominal; subject to industry tolerances. *Non-stock item; minimum runs apply. Please consult Customer Service for price and delivery. ** Maximum self-supporting lengths are based on safety factor of 5 and a tensile strength of 37,000 psi for soft drawn copper. Higher safety factors or lower tensile strength values may be required to address more stringent safety regulations. 94 MAXIMUM SELF- Phone: 888-593-3355 www.generalcable.com
